# ========================================================================================================
# CAMERA.A.CONF :
# --------------------------------------------------------------------------------------------------------
# Settings for operation of camera A in the sensor unit
#
# For general settings (plane distances, etc. ), please refer to the acquire.par file,
# For settings to camera B, please see camera.b.conf
# --------------------------------------------------------------------------------------------------------
# Explanaition :
# 
# [ DANGEROUS!  ] ........... do not change at all, may result in damaged unit or nonsensical measurement
# [ RECALIBRATE ] ........... changing these settings invalidates the calibration of the system!
# =======================================================================================================

# ======================================================================================================
# Only change settings below this line, if you know what you are doing!
# If in doubt, please consult JR / IAS.
# ======================================================================================================

xscale_a    = 0.161     # [ RECALIBRATE ] horizontal scale factor [ mm / px ], default == 0.161
distance_a  = 620.0     # [ RECALIBRATE ] optical distance to measurement area [ mm ], default == 620

# -----------------------------------------------------------------------------------------------------

cam_a_sn    = MT003405  # S/N camera A [ MTxxxxxx ] -> Only change to reflect hardware changes !!!
offset_a    = 0         # [ DANGEROUS! ] [ RECALIBRATE ] offset video level [-127,+127], default == 0
gain_a      = 0         # [ DANGEROUS! ] [ RECALIBRATE ] analog gain level [ 0 == default, 1, 2, 3 ]
exposure_a  = 14        # [ DANGEROUS! ] [ RECALIBRATE ] exposure time [ uS ], default == 14

# ======================================================================================================
# END OF CAMERA.A.CONF
# ======================================================================================================